[GB162 65kW]
Dimensions
Technical Parameters
| Parameter | Value |
|---|---|
| Output | 65kW |
| Nominal heat output at 50/30 °C | 15.6kW - 65.0kW |
| Nominal heat output at 80/60 °C | 14.2kW - 60.5kW |
| NOx rating at 0% oxygen, dry mg/kWh | 28 |
| Minimum gas pressure | 15 mbar |
| Maximum flue length 80/125mm | 7.7m |
| Maximum flue length 100/150mm | 20m [with adaptor] |
| Gas rating at 15 deg C 1013mbar | 6.96m³/h |
| Noise level at 1m | 46dB[A] |
| SEDBUK | A |
| Max working pressure | 4bar |
| Free feed pressure of fan | 120Pa |
| Condesate water rate natural gas G20, 50/30 °C | 6.91/h |
| Minimum water circulation volume | 0I/h |
| Flue gas mass flow rate, full load | 27.2g/s |
| Seasonal efficiency [as L2B] | 95.5% |
| Max flow temperature | 90°C |
| CO2 content at full load, natural gas G20 | 9.4% |
| Mains connection voltage | 230V |
| Electrical power consumption, full load | 99W |
| Electrical power consumption, part load | 21W |
| Gas pressure | 17 - 24mbar |
| Rated heat input | 14.5kW - 62.0kW |
| Standby heat loss | 0.05% |
| Flow temperature | 30°C to 90°C, can be set on the BC10 controller |
| Water content | 51 |
| pH value of condensate water | approx. 4.1 |
| Flue gas temperature 80/60 °C, full load | 64°C |
| Flue gas temperature 80/60 °C, part load | 57°C |
| Flue gas temperature 50/30 °C, full load | 43°C |
| Flue gas temperature 50/30 °C, part load | 33°C |
| Flue gas value group for air intake/flue gas system | 116[G61] |
| Electrical ingress protection | IPX4D |
| Current rating | 230 VAC, 50 Hz, 10A |
| Gas category according to EN 437 | GB/IE I2H, 20 mbar |
| Efficiency (NCV) | 108% |
Return to GB 162
Bosch Thermotechnology Ltd.